How to Coat a Timber Deck using Sikkens Cetol Deck

Watch our series of How-to videos on timber deck coating.

Prior to coating, ensure the timber is tenant free and clean. Watch our series of how to videos on preparing your deck.

Step one, ensure the surface of your deck is thoroughly sanded using 60 grit sandpaper. This will raise the grain of the timber, allowing optimum penetration and adhesion. Clean the decking so it's free from dust and debris after sanding.

Step two, for a premium oil based finish, apply one coat of Sikkens Cetol HLSE. Using the easy deck brush. Allow 24 hours to thoroughly dry.

Step three, apply two coats of Sikkens Cetol deck and allow 24 hours to dry between each application.

For further instructions, please refer to the back of the products or call Sikkens for technical advice