How to Coat using Sikkens Cetol Deck Slip Resistant
Watch our series of How-to videos on coating your deck.
Prior to coating, ensure the timber is tenant free and clean. Watch our series of how to videos on preparing your deck.
Step one, ensure the surface of your deck is thoroughly sanded using 60 grit sandpaper. This will raise the grain of the timber allowing optimum penetration and adhesion. Clean the decking so it's free from dust and debris after sandy.
Step two. Using a good quality brush, such as the EZ deck brush recommended for Sikkens coatings. Liberally apply one coat of Sikkens Cetol HLSE and allow 24 hours to dry.
Step three, apply two coats of Sikkens Cetol deck slip resistant and allow 24 hours to dry between each application.
For further instructions, please refer to the back of the products or call Sikkens for technical advice.