How to Coat a Timber Deck using Sikkens Cetol HLSe

Watch our series of "HowTo" videos on preparing your deck.

Prior to coating, ensure the timber is tannin free and clean. 

Step 1 - ensure the surface of your deck is thoroughly sanded using 60 grit sandpaper. This will raise the grain of the timber allowing optimum penetration and adhesion. Clean the decking so it's free from dust and debris after sanding.

Step 2 - using a good quality brush such as Sikkens Ezee deck brush, liberally applies Sikkens CETOL HLSe in the direction of the grain in your preferred colour. Apply three coats to your timber deck and allow 24 hours to dry between each application.

 For further instructions, please refer to the back of the product.